BendixKing KSN 770 - Pilots Guide - Manual (Page 422)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 15-149
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
Table 15--4 (cont)
FMS Messages
Message Description Type
UNABLE ADD
WPT(S) -- FPL FULL
Alerting Displayed when the pilot
attempts to enter more than
101 waypoints in a single flight
plan.
UNABLE Alerting Indicates the FAS datablock for
the approach fails CRC or
unable to load.
is the approach
selected (i.e., LP or LPV).
UNABLE
APPROACH
MODIFICATION
Alerting Indicates an attempt is made
to create an OBS to the FAWP
or MAWP waypoints.
UNABLE DEL --
USED BY ACTIVE
FPL
Alerting Indicates the pilot attempted to
delete from storage a waypoint
that is used in the active flight
plan.
UNABLE HOLD
CHANGE
Alerting Indicates an attempt to change
the course, turn direction, or
the holding quadrant of the
hold while actively flying the
hold. Also displayed when the
hold leg is defined by time and
an attempt to change to
distance is made, or vice
versa.
UNABLE FPL LOAD
-- INVALID WPT(s)
Alerting Indicates a stored flight plan
insertion request is received
and a waypoint in the stored
flight plan does not exist in the
NAV database or custom
database.
UNABLE OFFSET Alerting Indicates an attempt to insert
an offset during holding, a
pattern, or a terminal area
procedure.