BendixKing KSN 770 - Pilots Guide - Manual (Page 175)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 8-3
Terrain View
Honeywell International Inc. Do not copy without express permission of Honeywell.
Terrain View Display Modes
The pilot can select two terrain view modes by activating either of the
following bezel softkey labels .
D
ARC -- Displays arc view mode
D
360 -- Displays 360 compass view mode.
The display mode is indicated by the active bezel softkey label in the
upper--right corner of the terrain view. Figure 8--2 shows the arc view
mode as indicated by ARC displayed as the upper--right bezel softkey
label.
Figure 8--2
Terrain View -- Arc
In arc or 360 compass mode, the range scale is selected with the
zoom- in/+ and zoom- out/- bezel keys , such that the outer radius of
the primary range ring represents 5 , 10 , 15 , 20 , 30 , 40 ,
60 , 80 , and 100 nautical miles (NM) from the current aircraft
position.
NOTE: The terrain view display range setting is retained following a
power cycle.
A magnetic GPS ground track is displayed with a dashed cyan line
( ------ ) from the current aircraft to the range ring, in either the arc or
360 compass mode.