Position initialization – BendixKing KSN 770 - Pilots Guide User Manual
Page 278

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
15-5
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
Position Initialization
During power--up, the FMS position is automatically updated to the
GPS position when a valid GPS position is available. When no GPS
position is available,
GPS FAIL
or
GPS ACQ
is displayed indicating
the GPS position is not available.
If
GPS
position
becomes
unavailable during flight, the
KSN enters dead reckoning
(
DEAD RECKONING
) mode
for 15 minutes and assumes the
pilot will follow the flight plan. When dead reckoning is active and
panning is not active, the ownship symbol continues to move across the
existing flight plan with the position data provided by the FMS (except
when in the
charts view
).
After 15 minutes of no GPS
position,
LOSS OF NAV
is
displayed,
replacing
the
DEAD RECKONING
annunciation.
The
ownship
symbol remains displayed and the active leg in the flight plan is
displayed in green when the loss of navigation condition exists with a
valid GPS position. The ownship symbol is removed from display and
all legs of the active flight plan are displayed in white when both the loss
of navigation condition is met and the GPS position is invalid.