BendixKing KSN 770 - Pilots Guide - Manual (Page 356)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 15-83
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
Vectors to Final -- The vectors to final
selection provides a final approach
extension from the FAWP that can be
used to orient the flight crew while being
vectored to the final approach. Vectors to
final leg is indicated in the flight plan list
as FLY VTF .
The VTF bezel softkey label is
displayed on the left side of the waypoint
list when the waypoint list or home
window is selected and the vectors to
final approach transition is available.
Pushing the VTF bezel softkey activates the vectors to final function.
Suspend is active when VTF is selected and the difference between the
current aircraft track and desired aircraft track of the final approach
segment is greater than 45 degrees for more than 3 seconds.
NOTE: To undo vectors to final, reinsert the approach or select a
different approach.
Initial Approach, Final Approach,
and Missed Approach Waypoints --
IAWP , FAWP , and MAWP
headings are displayed above the initial
approach waypoint, final approach
waypoint, and missed approach
waypoint, respectively, when an
approach procedure is loaded into the
flight plan.
Temporary Waypoints -- Temporary
waypoints are part of a navigation
database loaded procedure or can be
created by the pilot. The waypoint is
assigned a name that describes how it
was defined and a number (XX). The
name is preceded by an asterisk (*) to
indicate a temporary waypoint.
Temporary waypoints can occur at a
geographically defined latitude/
longitude position (LLXX), a place
bearing distance (PBDXX), when a
course is intercepted (INTXX), or can
sequence when a certain altitude is
reached (ALTXX).