Figure 6-16 datalink weather overlay, Datalink weather overlay – BendixKing KSN 770 - Pilots Guide User Manual
Page 132

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Navigation Map View
6-34
Honeywell International Inc. Do not copy without express permission of Honeywell.
Datalink Weather Overlay
The datalink weather overlay enables display of NEXRAD and
precipitation on the navigation map, as shown in Figure 6--16.
Coverage is limited to the US, Puerto Rico, and Canada. The datalink
weather overlay is active when the
NXRD
bezel softkey label is
displayed and inactive when the
NXRD
bezel softkey label is
displayed. The datalink weather overlay default setting is inactive
(
NXRD
).
Figure 6--16
Datalink Weather Overlay
The NEXRAD overlay and terrain overlay are mutually exclusive. Only
one can be displayed at a time on the navigation map. The
NXRD
bezel softkey label becomes inactive when the
TERR
bezel softkey
is pushed.
The XM product ages box is displayed in the
lower--left corner of the navigation map and
datalink weather pages. The XM product ages
for the selected weather products are displayed
(in minutes) in green when data is being received
and updated.
If the generated data age is not available or after
startup no valid data has been received from the
receiver, the XM data ages are displayed as
dashes.