Pilz PNOZ s50 C - Manual (Page 34)

Commissioning
Operating Manual PNOZ s50
1002194­EN­02 34
INFORMATION
For details of the procedure when a message appears on the display,
please see the section entitled "Display menu at cold start".
In the Configuration operating state ("Run" LED flashes):
} The data is written to the chip card during configuration.
In the RUN operating state ("Run" LED is lit):
} The chip card containing a valid configuration must be inserted.
} The chip card must not be removed during operation.
6.2.4.1 Insert chip card
NOTICE
The chip card contact is only guaranteed if the contact surface is clean and
undamaged. For this reason please protect the chip card's contact surface
from
– Contamination
– Contact
– Mechanical impact, such as scratches.
Make sure that you do not bend the chip card as you insert it into the chip card slot.