ETS-Lindgren FM5004 Field Monitor (Archived) - Manual (Page 97)

D EFINE D EVICE T RIGGER
Description: Enters a command into the define device trigger buffer.
The command will be executed when a trigger
command is sent.
The maximum string length for the DDT command is
80 characters. Separate the commands with A;@.
Syntax: • *DDT
–or–
• *DDT?
Parameters: Any IEEE-488 command in the FM5004 command set
may be sent.
Example: • To load the device trigger buffer with a zero all
probes command:
*DDT;ZERO,0
• To verify which command is in the device trigger
buffer:
*DDT?
The FM5004 will return:
*DDT ZERO,0
If trigger is not set up the F5004 will return:
‘DDT No Device Trigger String’
Remote Operation | 97
Archived 10/19/10