ETS-Lindgren FM5004 Field Monitor (Archived) - Manual (Page 53)

SETUP SAVE/RECALL
Contains the items
associated with
saving and recalling
up to four different
setup configurations.
Each setup may
contain a separate
primary display and
an alternate display.
To switch between primary and alternate displays, on the front panel press and
release Shift and then press and release Alt Disp.
When the FM5004 is powered up it will be configured as it was before it was
previously powered down; any changes made to a setup will not be saved
permanently until it is saved in this menu.
The recall default setting will configure the FM5004 as it was shipped from the
factory.
Menu System | 53
Archived 10/19/10