ETS-Lindgren FM5004 Field Monitor (Archived) - Manual (Page 94)

S OFTWARE R EVISION
Description: Returns the revision number/level of the FM5004
software.
Syntax: SREV
Parameters: None
Example: To check the revision of the FM5004 software:
SREV?
The FM5004 will return:
SREV,2.0
V ERBOSE M ODE
Description: Sets the FM5004 to respond to remote commands in
verbose mode or to respond to inquiries only.
Syntax: VERB,x
Parameters: (x):
• 0 = verbose mode disabled
• 1 = verbose mode on
Example: • To place the FM5004 into verbose mode:
VERB,1
The FM5004 will return:
VERB,1
• To disable verbose mode: VERB,0
The FM5004 will not respond; verbose mode off.
94 | Remote Operation
Archived 10/19/10