Local (reset), Shift), Display – ETS-Lindgren FM5004 Field Monitor (Archived) User Manual
Page 31
(T
EMP
)
Press Shift and then Battery/(Temp) to display all selected probe temperatures
in Fahrenheit and in Celsius.
L
OCAL
(R
ESET
)
L
OCAL
Press Local to transfer control of the FM5004 to a remote device. The remote
device can be an RS-232 serial device or an IEEE-488 device. When the
FM5004 is in remote operation, REM appears in the upper left corner of the
display. Press Local again to return the FM5004 to local operation.
(R
ESET
)
Press and hold Shift and then press Reset to redraw the display and re-establish
communication with the probes. This is useful if the display malfunctions or
communication with a probe is lost. It will also reset the running minimum,
maximum, and average readings if they are active.
Press Reset while pressing Shift to cause a hard reset. This is equivalent to
cycling the power on the FM5004.
(S
HIFT
)
When Shift is pressed, the functions in parentheses become active. When
active, Shift displays. Press Shift again to turn it off.
Display
The display is 240x64 with an adjustable LED back light. The display is used to
indicate probe and status information as well as to display the menu windows for
system setup.
Front Panel Controls and Indicators
| 31
Archived 10/19/10