ETS-Lindgren FM5004 Field Monitor (Archived) - Manual (Page 100)

O PERATION C OMPLETE
Description: Sets or returns the operation complete enable bit in the
standard event register.
Syntax: • *OPC x
–or–
• *OPC?
Parameters: Operation complete enable bit (x):
• 0 = disable operation complete function
• 1 = enable operation complete function
Example: • To enable the operation complete function:
*OPC,1
• To check if the current operation is complete:
*OPC?
If the current operation is complete, the FM5004 will
return:
*OPC,1
If the current operation is not complete, the FM5004
will return:
*OPC,0
100 | Remote Operation
Archived 10/19/10