Probe / 3-axis alarm setup – ETS-Lindgren FM5004 Field Monitor (Archived) User Manual

Page 48

Contains the items

associated with

setting up the alarms

for the FM5004.

4-PROBE / 3-AXIS

ALARM

SETUP

Contains the items

associated with the

following functions:

• Enabling the upper and

lower alarms.

• Setting the levels that

will cause an alarm.

• The pulse type of the

alarm.

• Upper Enable:

The alarm will activate when the measured field is

greater than the upper alarm value.

• Upper Value:

Calls the numeric entry screen to enter the upper

measured field value above which the alarm will

activate.

• Lower Enable:

The alarm will activate when the measured field falls

below the lower alarm value.

48 |

Menu System

Archived 10/19/10