ETS-Lindgren FM5004 Field Monitor (Archived) - Manual (Page 101)

R ESET
Description: Causes the FM5004 to perform a system reset.
Syntax: *RST
Parameters: None
Example: To cause a system reset on the FM5004: *RST
The reset will occur without any response; wait
six seconds before sending another command to the
FM5004.
The operation complete enable bit will be set after the
reset.
S ELF -T EST
Description: Causes the FM5004 to perform a self-test.
Syntax: *TST?
Parameters: None
Example: To perform a self-test of the FM5004: *TST?
If the test passes, a 1 will be returned, if it fails, a 0 will
be returned:
*TST 1
Remote Operation | 101
Archived 10/19/10