ETS-Lindgren FM5004 Field Monitor (Archived) - Manual (Page 60)

Pin Signal Data Direction Description
1 DCD Input to FM5004 Device Carrier Detect
2 RD Input to FM5004 Receive Data
3 TD Output from FM5004 Transmit Data
4 DTR Output from FM5004 Data Terminal Ready
5 GND NA Ground
6 NC NA No Connection
7 RTS Output from FM5004 Ready to Send
8 CTS Input to FM5004 Clear to Send
9 NC NA No Connection
A null modem cable or adapter is required to interface the FM5004 to
a standard serial port on a personal computer.
Remote Commands
For system level commands required for IEEE-488.2 compliance, see
page 96.
The following conventions are used in the remote commands and returned data
syntax:
• x—A lowercase x represents a numeric value, which may be a voltage
value or a numeral associated with a functional selection.
• n—A lowercase n represents a channel number (1 through 4)
associated with a system probe.
• m—A lowercase m represents a mode selection.
60 | Remote Operation
Archived 10/19/10