Cisco 10000 - Manual (Page 542)

Index
IN-14
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
NSF 18-1
Prerequisites 18-4
pseudowire 18-2
Restrictions 18-5
show acircuit checkpoint command 18-7
show mpls l2transport checkpoint command 18-7
show mpls l2transport vc detail command 18-7
SSO 18-1
VPLS 18-1
VPWS 18-1
L4R translations 2-3, 2-5
Label Forwarding Information Base 3-40
labels
transport 3-46
verifying
label bindings 3-42
label distribution 3-41
MPLS labels 3-41, 3-43
label switching, configuring 3-23
LAC 5-10, 5-11
configuring static domain name 5-10
definition 1-5
dynamic tunnel selection 5-5
enabling domain preauthorization 5-11
feature overview 5-2
limiting sessions per tunnel 5-12
looking for tunnel definitions 5-7
restrictions 5-7
to LNS topology 5-3, 5-22
verifying tunnel sharing 5-8
LAIS major alarm 14-31
LAN 1-5
layer 2
forwarding 1-5
tunnel protocol 1-5
layer 2 local switching 1-21
ATM-to-ATM PVC 18-14
Layer 2 Local Switching feature
ATM AAL5 SDU support
MPLS in VC class configuration
OAM cell emulation
18-18
MPLS on a PVC
OAM cell emulation 18-16
ATM-to-ATM local switching 18-15
OAM cell emulation 18-15
layer 2 local switching feature
Frame Relay-to-Frame Relay 18-31
supported line cards 18-14, 18-31
Layer 4 Redirect scaling 2-4
LCP 9-8, 1-5
LCP, See Link Control Protocol.
LDP 3-40
leased-line applications
combined with broadband 1-12, 1-13, 1-14, 1-15
LFIB 3-40
LFI over Frame Relay (FRF.12) 1-21
line alarm indicate signal major alarm 14-31
Link Control Protocol
link control protocol 9-8, 1-5
Link Fragmentation and Interleaving 19-17
Link Noise Monitoring 17-1
link outages
filtering 14-24, 14-25
listening mode 2-19
LMI sample topology 18-30
LNS
configuration example 5-30
configuring for RADIUS tunnel authentication 5-42
configuring RADIUS tunnel authentication method
lists
5-42
configuring sessions per tunnel limiting 5-36
configuring to initiate and receive L2TP traffic 5-29
configuring VPDN group 5-29
definition 1-6
managed LNS
architecture 1-6
mapping ingress tunnel name 9-4