New features in cisco ios release 12.2(28)sb – Cisco 10000 User Manual
Page 52
1-20
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 1 Broadband Aggregation and Leased-Line Overview
New Features, Enhancements, and Changes
New Features in Cisco IOS Release 12.2(28)SB
The following features are new on the Cisco 10000 series router in Cisco IOS Release 12.2(28)SB:
•
AAA CLI Stop Record Enhancement in the Per VRF AAA feature guide, located at the following
URL:
ac1.html
•
Any Transport Over MPLS: Frame Relay over MPLS (FRoMPLS) in
•
Cisco 10000 series router 4-Port Channelized T3 Half-Height line card (new line card) in the
following guides:
–
Cisco 10000 Series Router Line Card Configuration Guide, located at the following URL:
–
Cisco 10000 Series Router Line Card Hardware Installation Guide, located at the following
URL:
•
Cisco 10000 series 4-Port OC-3/STM-1c ATM line card (long reach optics added to the existing line
card) in the Cisco 10000 Series Router Line Card Hardware Installation Guide, located at the
following URL:
•
Commands:
–
Changes to show pxf command output.
–
New commands (pos flag s1-byte tx and pos flag s1-byte rx-communicate) for Packet Over
SONET and ATM line cards in the Cisco 10000 Series Router Line Card Configuration Guide,
located at the following URL:
–
Changes to the show running vrf command in the MPLS VPN—Show Running VRF feature
guide, located at the following URL:
l
–
New command for providing policy map information in the QoS: Enhanced Show Commands
for Active Policies feature guide, located at the following URL:
l
•
Define Interface Policy-Map AV Pairs AAA in the Define Interface Policy-Map AV Pairs AAA
feature guide, located at the following URL:
ed5.html
•
Frame Relay PVC Interface Priority Queueing in the
Cisco 10000 Series Router Quality of Service
Configuration Guide, located at the following URL: