Cisco 10000 User Manual

Page 54

1-22

Cisco 10000 Series Router Software Configuration Guide

OL-2226-23

Chapter 1 Broadband Aggregation and Leased-Line Overview

New Features, Enhancements, and Changes

•

MPLS Egress Netflow Accounting in the MPLS Egress Netflow Accounting feature guide, located
at the following URL:

http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a0080611269.html

•

MPLS High Availability Overview in the MPLS High Availability: Overview feature guide, located
at the following URL:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/products_feature_guide09186a00805ad
326.html

Note

In Cisco IOS Release 12.2(28)SB, the Cisco 10000 series router supports Route Processor
Redundancy Plus (RPR+) and Stateful Switchover (SSO). However, for broadband aggregation
features the router supports RPR+ only.

•

NSF/SSO—MPLS LDP and LDP Graceful Restart in the NSF/SSO—MPLS LDP and LDP Graceful
Restart feature guide, located at the following URL:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/products_feature_guide09186a008029b
285.html

•

NSF/SSO—MPLS VPN in the NSF/SSO—MPLS VPN feature guide, located at the following URL:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/products_feature_guide09186a00805ad
34f.html

•

MPLS High Availability: Command Changes in the MPLS High Availability: Command Changes
feature guide, located at the following URL:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/products_feature_guide09186a00805ad
151.html

•

Cisco Express Forwarding: Command Changes in the Cisco Express Forwarding: Command
Changes feature guide, located at the following URL:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/products_feature_guide09186a008029b
100.html

•

MPLS—LDP MD5 Global Configuration in the MPLS—LDP MD5 Global Configuration feature
guide, located at the following URL:

http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a00805f24da.html

•

MPLS VPN—Explicit Null Label Support with BGP IPv4 Label Session in the MPLS
VPN—Explicit Null Label Support with BGP IPv4 Label Session feature guide, located at the
following URL:

http://www.cisco.com/en/US/products/ps6566/products_feature_guides_list.html

•

Load Splitting IP Multicast Traffic—For more information about configuring native multicast load
splitting, see the configuration document located at the following URL:

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080
5a595a.html

Note

You should not configure native multicast load splitting for PE devices running EIBGP as this
can result in a loss of traffic.

•

Multicast-VPN: Multicast Support for MPLS VPN in the Multicast VPN—IP Multicast Support for
MPLS VPNs feature guide, located at the following URL: