Verifying layer 2 local switching for frame relay, Configuring qos features – Cisco 10000 User Manual
Page 402
18-34
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 18 Configuring L2 Virtual Private Networks
Configuration Tasks for L2VPN
shows how to configure Frame Relay same-port switching.
Example 18-25 Configuring Frame Relay Same-Port Switching
frame-relay switching
interface serial 1/0/0.1/1:0
encapsulation frame-relay
frame-relay intf-type nni
frame-relay interface-dlci 100 switched
exit
exit
connect connection1 serial1/0 100 serial1/0 200
Verifying Layer 2 Local Switching for Frame Relay
To verify configuration of the Layer 2 Local Switching feature, use the show connection
frame-relay-to-frame-relay command and the show frame-relay pvc command in privileged EXEC
mode.
shows the output of the show connection frame-relay-to-frame-relay command, which
displays the local connection between a Frame Relay interface and a Frame Relay local switching
interface.
Example 18-26 show connection frame-relay-to-frame-relay Command Output
Router# show connection frame-relay-to-frame-relay
ID Name Segment 1 Segment 2 State
==================================================================
1 fr2fr Se3/0/0.1/1:0 100 Se3/0/0.1/2:0 200 UP
shows the output of the show frame-relay pvc command, which shows a switched
Frame Relay PVC.
Example 18-27 show frame-relay pvc Command Output
Router# show frame-relay pvc 16
PVC Statistics for interface POS5/0 (Frame Relay NNI)
DLCI = 16, DLCI USAGE = SWITCHED, PVC STATUS = UP, INTERFACE = POS5/0
LOCAL PVC STATUS = UP, NNI PVC STATUS = ACTIVE
input pkts 0 output pkts 0 in bytes 0
out bytes 0 dropped pkts 100 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
switched pkts 0
Detailed packet drop counters:
no out intf 0 out intf down 100 no out PVC 0
in PVC down 0 out PVC down 0 pkt too big 0
pvc create time 00:25:32, last time pvc status changed 00:06:31
Configuring QoS Features
For information about configuring QoS features on the Cisco 10000 series router, see the
outline the level of support for modular QoS CLI (MQC) commands as they
relate to Frame Relay DLCI interfaces.