Cisco 10000 - Manual (Page 474)

20-12
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 20 Configuring Gigabit EtherChannel Features
Configuring 8 Member Links per GEC Bundle
For more information on how to aggregate multiple Ethernet links into one logical channel, see IEEE
802.3ad Link Bundling feature guide at:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/newft/122sb31/sbcelacp.htm#wp1
053782
Configuration Example
This section provides the following configuration examples:
• Configuration Example for Applying VLAN QoS on GEC Bundle Subinterfaces, page 20-12
• Configuration Example for Using the VLAN Group Feature to Apply QoS, page 20-13
Note When service policy is applied to port channel’s main or subinterface, changing the load balancing mode
from VLAN to flow is not supported.
Configuration Example for Applying VLAN QoS on GEC Bundle Subinterfaces
Example 20-5 shows how VLAN QoS is applied on GEC bundle subinterfaces:
Example 20-5 Applying VLAN QoS on GEC Bundle Subinterfaces
Class-map match-any dscp_20_30
Match dscp 20 30
Class-map match-any dscp_40
Match dscp 40
Policy-map police_dscp
Class dscp_20_30
Police 50 3000 3000 conform-action transmit exceed-action drop
Set ip dscp af22
Class dscp_40
Police 10 3000 3000 conform-action transmit exceed-action drop
Policy-map customer_A
Class class-default
Police 100 mpbs
service-policy police_dscp
Policy-map customer_B
Class class-default
Police 150 mbps
Service-policy police_dscp
Interface Port-channel 1.1
Service-policy input customer_A
encapsulation dot1q 1 primary gigabitethernet2/1/0 secondary gigabitethernet8/0/0
Interface Port-channel 1.2
Service-policy input customer_B
encapsulation dot1q 1 primary gigabitethernet2/1/0 secondary gigabitethernet8/0/0