Dell PowerEdge M805 User Manual
Page 79
Command Groups
41
ip ospf retransmit-interval
Sets the OSPF retransmit Interval for the specified
interface.
IC
ip ospf transmit-delay
Sets the OSPF Transit Delay for the specified interface.
IC
maximum-paths
Sets the number of paths that OSPF can report for a given
destination.
ROSPF
redistribute
Configures OSPF protocol to allow redistribution of routes
from the specified source protocol/routers.
ROSPF
router-id
Sets a 4-digit dotted-decimal number uniquely identifying
the router OSPF ID.
ROSPF
router ospf
Enters Router OSPF mode.
GC
show ip ospf
Displays information relevant to the OSPF router.
PE
show ip ospf abr
Displays the internal OSPF routing table entries to Area
Border Routers (ABR).
PE
UE
show ip ospf area
Displays information about the identified OSPF area.
PE
show ip ospf asbr
Displays the internal OSPF routing table entries to
Autonomous System Boundary Routes (ASBR).
PE
UE
show ip ospf database
Displays information about the link state database when
OSPF is enabled.
PE
show ip ospf database database-
summary
Displays the number of each type of LSA in the database
for each area and for the router.
PE
show ip ospf interface
Displays the information for the IFO object or virtual
interface tables.
PE
show ip ospf interface brief
Displays brief information for the IFO object or virtual
interface tables.
PE
show ip ospf interface stats
Displays the statistics for a specific interface.
PE
show ip ospf neighbor
Displays information about OSPF neighbors.
PE
show ip ospf range
Displays information about the area ranges for the
specified area-id.
PE
show ip ospf statistics
Displays information about recent Shortest Path First
(SPF) calculations.
PE
UE
show ip ospf stub table
Displays the OSPF stub table.
PE
show ip ospf virtual-link
Displays the OSPF Virtual Interface information for a
specific area and neighbor.
PE
show ip ospf virtual-link brief
Displays the OSPF Virtual Interface information for all
areas in the system.
PE
timers spf
Configures the SPF delay and hold time.
ROSPF
Command
Description
Mode*