Dell PowerEdge M805 - Manual (Page 479)

Spanning Tree Commands 471
Syntax
spanning-tree mst max-hops hop-count
no spanning-tree mst max-hops
• hop-count—Number of hops in an MST region before the BDPU is discarded.
(Range: 1-40)
Default Configuration
The default number of hops is 20.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the maximum number of hops that a packet travels in an
MST region before it is discarded to 10.
console(config)#spanning-tree mst max-hops 10
spanning-tree mst port-priority
Use the spanning-tree mst port-priority command in Interface Configuration mode to configure
port priority. To return to the default port priority, use the no form of this command.
Syntax
spanning-tree mst instance-id port-priority priority
no spanning-tree mst instance-id port-priority
• instance-ID—ID of the spanning-tree instance. (Range: 1-16)
• priority—The port priority. (Range: 0 - 240 in multiples of 16)
Default Configuration
The default port-priority for IEEE MSTP is 128.
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode
User Guidelines
This command has no user guidelines.