Dell PowerEdge M805 - Manual (Page 768)

776 PIM-SM Commands
www
.dell.com | support.dell.com
Example
The following example enables PIM trap mode.
console(config)#ip pim-trapflags
show ip pimsm
Use the show ip pimsm command in Privileged EXEC mode to display the system-wide
information for PIM-SM.
Syntax
show ip pimsm
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the system-wide information for PIM-SM.
console#show ip pimsm
Admin Mode..................................... Disable
Join/Prune Interval (secs)..................... 60
Data Threshold Rate (Kbps)..................... 50
Register Threshold Rate (Kbps)................. 50
PIM-SM INTERFACE STATUS
Interface Interface Mode Protocol State
--------- -------------- --------------
show ip pimsm componenttable
Use the show ip pimsm componenttable command in Privileged EXEC mode to display the table
containing objects specific to a PIM domain. One row exists for each domain to which the router is
connected.