Dell PowerEdge M805 - Manual (Page 206)

176 GVRP Commands
www
.dell.com | support.dell.com
Example
The following example enables GVRP on ethernet 1/g8.
console(config)#interface ethernet 1/g8
console(config-if-1/g8)#gvrp enable
gvrp registration-forbid
Use the gvrp registration-forbid command in Interface Configuration mode to deregister all
VLANs on a port and prevent any dynamic registration on the port. To allow dynamic registering
for VLANs on a port, use the no form of this command.
Syntax
gvrp registration-forbid
no gvrp registration-forbid
Default Configuration
Dynamic registering and deregistering for each VLAN on the port is not forbidden.
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how default dynamic registering and deregistering is forbidden
for each VLAN on port 1/g8.
console(config)#interface ethernet 1/g8
console(config-if-1/g8)#gvrp registration-forbid
gvrp vlan-creation-forbid
Use the gvrp vlan-creation-forbid command in Interface Configuration mode to disable dynamic
VLAN creation. To disable dynamic VLAN creation, use the no form of this command.
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid