Dell PowerEdge M805 - Manual (Page 498)

492 Syslog Commands
www
.dell.com | support.dell.com
<189> JAN 13 05:20:27 192.168.2.1-1 UNKN[248900192]:
cmd_logger_api.c(87) 2113 %% CLI:EIA-
232:----:vlan 3
<189> JAN 13 05:20:27 192.168.2.1-1 UNKN[248900192]:
cmd_logger_api.c(87) 2114 %% CLI:EIA-
232:----:ex
<189> JAN 13 05:20:28 192.168.2.1-1 UNKN[248900192]:
cmd_logger_api.c(87) 2115 %% CLI:EIA-
232:----:
<189> JAN 13 05:20:39 192.168.2.1-1 UNKN[248900192]:
cmd_logger_api.c(87) 2116 %% CLI:EIA-
232:----:show logging file
logging
Use the logging command in Global Configuration mode to log messages to a syslog server. To
delete the syslog server with the specified address from the list of syslogs, use the no form of this
command.
Syntax
logging {ip-address | hostname}
no logging {ip-address | hostname}
• ip-address—IP address of the host to be used as a syslog server.
• hostname—Hostname of the host to be used as a syslog server. (Range: 1-158 characters)
Default Configuration
No syslog servers defined.
Command Mode
Global Configuration mode
User Guidelines
Up to eight syslog servers can be used.
Example
The following example places the designated server in logging configuration mode.
console(config)#logging 192.168.15.1