Dell PowerEdge M805 User Manual
Page 78
40
Command Groups
www
.dell.com | support.dell.com
area virtual-link
Creates the OSPF virtual interface for the specified area-id
and neighbor router.
ROSPF
area virtual-link authentication
Configures the authentication type and key for the OSPF
virtual interface identified by the area ID and neighbor ID.
ROSPF
area virtual-link dead-interval
Configures the dead interval for the OSPF virtual interface
on the virtual interface identified by area-id and neighbor
router.
ROSPF
area virtual-link hello-interval
Configures the hello interval for the OSPF virtual interface
on the virtual interface identified by the area ID and
neighbor ID.
ROSPF
area virtual-link retransmit-
interval
Configures the retransmit interval for the OSPF virtual
interface on the virtual interface identified by the area ID
and neighbor ID.
ROSPF
area virtual-link transmit-delay
Configures the transmit delay for the OSPF virtual
interface on the virtual interface identified by the area ID
and neighbor ID.
ROSPF
default-information originate
Controls the advertisement of default routes.
ROSPF
default-metric
Sets a default for the metric of distributed routes.
ROSPF
distance ospf
Sets the route preference value of OSPF in the router.
ROSPF
distribute-list out
Specifies the access list to filter routes received from the
source protocol.
ROSPF
enable
Resets the default administrative mode of OSPF in the
router (active).
ROSPF
exit-overflow-interval
Configures the exit overflow interval for OSPF.
ROSPF
external-lsdb-limit
Configures the external LSDB limit for OSPF.
ROSPF
ip ospf
Enables OSPF on a router interface
IC
ip ospf areaid
Sets the OSPF area to which the specified router interface
belongs.
IC
ip ospf authentication
Sets the OSPF Authentication Type and Key for the
specified interface.
IC
ip ospf cost
Configures the cost on an OSPF interface.
IC
ip ospf dead-interval
Sets the OSPF dead interval for the specified interface.
IC
ip ospf hello-interval
Sets the OSPF hello interval for the specified interface.
IC
ip ospf mtu-ignore
Disables OSPF maximum transmission unit (MTU)
mismatch detection.
IC
ip ospf priority
Sets the OSPF priority for the specified router interface.
IC
Command
Description
Mode*