Dell PowerEdge M805 - Manual (Page 238)

210 Link Dependency Commands
www
.dell.com | support.dell.com
no add port-channel
Use the no add port-channel command to remove member port-channels from the dependency
list.
Syntax
no add port-channel port channel list
• port-channel-list—List of port-channel interfaces. Separate nonconsecutive ports with a
comma and no spaces. Use a hyphen to designate the range of ports. (Range: Valid port-
channel interface list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-linkDep-group-1)#no add port-channel 2
depends-on ethernet
Use the depends-on ethernet command to add the dependent Ethernet ports list.
Syntax
depends-on ethernet intf-list
• intf-list—List of Ethernet interfaces. Separate nonconsecutive ports with a comma and
no spaces. Use a hyphen to designate the range of ports. (Range: Valid Ethernet interface
list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines