Dell PowerEdge M805 - Manual (Page 43)

Command Groups 5
Layer 2 Commands
Management ACL Commands
User Interface Commands
AAA Commands
Command Description Mode*
deny (management) Defines a deny rule. MA
management access-class Defines which management access-list is used. GC
management access-list Defines a management access-list, and enters the access-
list for configuration. GC
permit (management) Defines a permit rule. MA
show management access-class Displays the active management access-list. PE
show management access-list Displays management access-lists. PE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
enable Enters the privileged EXEC mode. UE
end Gets the CLI user control back to the privileged execution
mode or user execution mode. Any
exit(configuration) Exits any configuration mode to the previously highest
mode in the CLI mode hierarchy. (All)
exit(EXEC) Closes an active terminal session by logging off the switch. UE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
aaa authentication enable Defines authentication method lists for accessing higher
privilege levels. GC
aaa authentication login Defines login authentication. GC
enable authentication Specifies the authentication method list when accessing a
higher privilege level from a remote telnet or console. LC
enable password Sets a local password to control access to the normal level. GC
ip http authentication Specifies authentication methods for http. GC