Dell PowerEdge M805 - Manual (Page 516)

512 VLAN Commands
www
.dell.com | support.dell.com
interface vlan
Use the interface vlan command in Global Configuration mode to configure a VLAN type and to
enter Interface Configuration mode.
Syntax
interface vlan vlan-id
• vlan-id—The ID of a valid VLAN (Range: 0-4093).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the VLAN 1 IP address of 131.108.1.27 and subnet mask
255.255.255.0.
console(config)#interface vlan 1
console(config-vlan)#ip address 131.108.1.27 255.255.255.0
interface range vlan
Use the interface range vlan command in Global Configuration mode to execute a command on
multiple VLANs at the same time.
Syntax
interface range vlan {vlan-range|all}
• vlan-range—A list of valid VLAN IDs to add. Separate nonconsecutive VLAN IDs with a
comma and no spaces; use a hyphen to designate a range of IDs. (Range: 2 - 4093)
• all—All existing static VLANs.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode