Dell PowerEdge M805 - Manual (Page 62)

24 Command Groups
www
.dell.com | support.dell.com
SNMP Commands
show rmon statistics Displays RMON Ethernet Statistics. UE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
show snmp Displays the SNMP status. PE
show snmp engineID Displays the SNMP engine ID. PE
show snmp filters Displays the configuration of filters. PE
show snmp groups Displays the configuration of groups. PE
show snmp users Displays the configuration of users. PE
show snmp views Displays the configuration of views. PE
snmp-server community Sets up the community access string to permit access to
SNMP protocol. GC
snmp-server community-group Maps SNMP v1 and v2 security models to the group name. GC
snmp-server contact Set s up a system contact (sysContact) string. GC
snmp-server enable traps Enables the switch to send SNMP traps or SNMP
notifications. GC
snmp-server engineID local Specifies the Simple Network Management Protocol
(SNMP) engine ID on the local switch. GC
snmp-server filter Creates or updates an SNMP server filter entry. GC
snmp-server group Configures a new SNMP group or a table that maps SNMP
users to SNMP views. GC
snmp-server host Specifies the recipient of SNMP notifications. GC
snmp-server location Sets the system location string. GC
snmp-server trap authentication Enables the switch to send SNMP traps when
authentication failed. GC
snmp-server v3-host Specifies the recipient of SNMPv3 notifications. GC
snmp-server user C onfigures a new SNMP Version 3 user. GC
snmp-server view Creates or updates a Simple Network Management
Protocol (SNMP) server view entry. GC
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.