Dell PowerEdge M805 - Manual (Page 492)

486 SSH Commands
www
.dell.com | support.dell.com
The following example displays the SSH public called "dana."
console#show crypto key pubkey-chain ssh username dana
Username: dana
rsa key data:
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAywqRKTRnexccxVUVTeMl+Gkh
imyUDhcTkgEfssLPMsgoXlTwzCE5+97UIIsSRKQQWR+pBNl45tCYd75LUofV
4LP6Lj1Q5Q0w5lBgiqC2MZ/iBHGSsHMAE0lpYtelZprDu4uiZHMuWezmdQp9
a1PU4jwQ22TlcfaUq3sqC3FMUoU=
Fingerprint: 2f:09:e7:6f:c9:bf:ab:04:d4:6f:a0:eb:e8:df:7a:11
show ip ssh
Use the show ip ssh command in Privileged EXEC mode to display the SSH server configuration.
Syntax
show ip ssh
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the SSH server configuration.
console#show ip ssh
SSH server enabled. Port: 22
RSA key was generated.
DSA key was generated.
SSH Public Key Authentication is enabled.
Active incoming sessions:
IP Address User Name Idle Time SessionTime
--------------- -------------------- -------------- --------------
10.240.1.122 John 00:00:00 00:00:08