Dell PowerEdge M805 - Manual (Page 406)

396 Radius Commands
www
.dell.com | support.dell.com
• deadtime—Length of time in minutes, for which a Radius server is skipped over by
transaction requests. (Range: 0 - 2000 minutes)
Default Configuration
The default dead time is 0 minutes.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the interval for which any unavailable Radius servers are skipped
over by transaction requests to 10 minutes.
console(config)#radius-server deadtime 10
radius-server host
Use the radius-server host command in Global Configuration mode to specify a RADIUS server
host and enter RADIUS Configuration mode. To delete the specified Radius host, use the no form
of this command.
Syntax
radius-server host {ip-address |hostname}
no radius-server host {ip-address |hostname}
• ip-address—The R ADIUS server host IP address.
• hostname — Host name of the Radius server host. (Range: 1-158 characters)
Default Configuration
The parameters deadtime, key, source-ip, timeout and retransmit are set to the global values
and the parameters auth-port-number, priority, usage are set to the default values 1812, 0 and
all, respectively.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.