Dell PowerEdge M805 - Manual (Page 696)

702 OSPF Commands
www
.dell.com | support.dell.com
External LSA Checksum.......................... 0
New LSAs Originated............................ 0
LSAs Received.................................. 0
External LSDB Limit............................ No Limit
Default Metric................................. Not configured
Default Route Advertise........................ Enabled
Always......................................... TRUE
Metric......................................... 100
Metric Type.................................... External Type 1
Maximum Paths.................................. 2
Redistributing.................................
Source......................................... rip
Metric......................................... 90
Metric Type.................................... 1
Tag............................................ 555
Subnets........................................ Yes
Distribute List................................ ACL2
show ip ospf abr
This command displays the internal OSPF routing table entries to Area Border Routers (ABR).
This command takes no options.
Syntax
show ip ospf abr
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.