Dell PowerEdge M805 - Manual (Page 367)

QoS Commands 355
The CLI mode is changed to Class-Map Configuration when this command is executed
successfully.
Example
The following example creates a class-map named "DELL" which requires all ACE’s to be
matched.
console(config)#class-map DELL
console(config-cmap)#
class-map rename
Use the class-map rename command in Global Configuration mode to change the name of a
DiffServ class.
Syntax
class-map rename
• classname—The name of an existing DiffServ class. (Range: 1 - 31 characters)
• newclassname—A case-sensitive alphanumeric string. (Range: 1 - 31 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to change the name of a DiffServ class from "DELL" to
"DELL1."
console(config)#class-map rename DELL DELL1
console(config)#
classofservice dot1p-mapping
Use the classofservice dot1p-mapping command in Global Configuration mode to map an 802.1p
priority to an internal traffic class. In Interface Configuration mode, the mapping is applied only to
packets received on that interface. Use the no form of the command to remove mapping between
an 802.1p priority and an internal traffic class.