Dell PowerEdge M805 User Manual

Page 114

Using the CLI

www

.dell.com | support.dell.com

CPU: Motorola E500 : Unknown system version

Runtime Name: VxWorks

Runtime Version: 5.5.1

BSP version: 1.2/0

Created: Feb 8 2006, 16:40:43

WDB Comm Type: WDB_COMM_NETWORK

WDB: Ready.

Timebase: 66.666666 MHz, MEM: 266.666664 MHz, PCI: 66.666666 MHz,

CPU:

533.33332

8 MHz

SOC unit 0 attached to PCI device BCM56304_B0

SOC unit 1 attached to PCI device BCM56304_B0

Adding BCM transport pointers

Configuring CPUTRANS TX

Configuring CPUTRANS RX

st_state(0) = 0x0

st_state(1) = 0x4

st_state(2) = 0x2

(Unit 1)>STACK: master on 0:2:bc:0:30:66 (1 cpu, 2 units)

STACK: attach 2 units on 1 cpu

This switch is manager of the stack.

User:

Boot Utility Menu

If a user is connected through the serial interface during the boot sequence, pressing the
key interrupts the boot process and displays a Boot Utility Menu. Selecting item 2 displays the
menu and may be typed only during the initial boot up sequence. Once the system boot up is
complete, typing the escape sequence does not display the menu.