Dell PowerEdge M805 - Manual (Page 719)

OSPFv3 Commands 725
area stub
Use the area stub command in Router OSPFv3 Configuration mode to create a stub area for the
specified area ID. A stub area is characterized by the fact that AS External LSAs are not propagated
into the area. Removing AS External LSAs and Summary LSAs can significantly reduce the link
state database of routers within the stub area.
Syntax
area areaid stub
no area areaid stub
• areaid—Valid OSPFv3 area identifier.
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example creates a stub area for area 1.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 stub
area stub no-summary
Use the area stub no-summary command in Router OSPFv3 Configuration mode to disable the
import of Summary LSAs for the stub area identified by areaid.
Syntax
area areaid stub no-summary
no area areaid stub no-summary
• areaid—Valid OSPFv3 area identifier.
Default Configuration
This command has no default configuration.