Dell PowerEdge M805 - Manual (Page 575)

DHCPv6 Commands 575
Example
The following example sets the DNS domain name "test", which is provided to a DHCPv6
client by the DHCPv6 server.
console(config)#ipv6 dhcp pool addrpool
console(config-dhcp6s-pool)#domain-name test
console(config-dhcp6s-pool)#no domain-name test
ipv6 dhcp pool
Use the ipv6 dhcp pool command in Global Configuration mode to enter IPv6 DHCP Pool
Configuration mode. DHCPv6 pools are used to specify information for DHCPv6 server to
distribute to DHCPv6 clients. These pools are shared between multiple interfaces over which
DHCPv6 server capabilities are configured.
Syntax
ipv6 dhcp pool pool-name
no ipv6 dhcp pool pool-name
• pool-name—DHCPv6 pool name. (Range: 1-31 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enters IPv6 DHCP Pool Configuration mode.
console(config)#ipv6 dhcp pool addrpool
console(config-dhcp6s-pool)#
ipv6 dhcp relay
Use the ipv6 dhcp relay command in Interface Configuration mode to configure an interface for
DHCPv6 relay functionality.