Cardinal Industries 225 WEIGHT INDICATOR - Manual (Page 98)

ACCUMULATORS, CONT.
ID Accumulators
To View An ID Accumulator:
1. With the indicator in normal operations mode, press the ACCUM key. The display will
ULATOR=.
ed or if the accumulator value is
will be displayed.
ator:
The display will
MULATOR=.
ress the ENTER key.
change to show ACCUM
2. Press the ID key. The display will change to show Id=.
3. Enter the ID string and press the ENTER key.
4. The accumulator value of the ID entered will be display
greater than (>) 999,999,999, OVERFLOW
5. Press the ENTER key to return to normal operation.
To Print A Single ID Accumul
1. With the indicator in normal operations mode, press the ACCUM key.
change to show ACCU
2. Press the ID key. The display will change to show Id=.
3. Enter the ID string and p
4. Press the PRINT key. The accumulator value for the ID entered will be printed.
5. The indicator will return to normal operation when printing has been completed.
To Print All
U U
Active ID Accumulators:
1. With the indicator in normal operations mode, press the ACCUM key. The display will
ULATOR=.
The accumulator values for ALL active IDs will be printed.
n completed.
o Zero A Single ID Accumulator:
1. With the indicator in normal operations mode, press the ACCUM key. The display will
change to show ACCUMULATOR=.
2. Press the ID key. The display will change to show Id=.
3. Enter the ID string and press the ENTER key.
4. Press the ZERO key. The accumulator value for the ID entered will be reset to zero.
5. The indicator will return to normal operation when the ID entered has been zeroed.
To Zero
U
All
change to show ACCUM
2. Press the ID key. The display will change to show Id=.
3. Press the PRINT key.
4. The indicator will return to normal operation when printing has bee
T
U
Active ID Accumulators:
1. With the indicator in normal operations mode, press the ACCUM key. The display will
change to show ACCUMULATOR=.
2. Press the ID key. The display will change to show Id=.
3. Press the DELETE key.
4. The accumulator values for ALL active IDs will be reset to zero.
5. The indicator will return to normal operation when all active IDs have been zeroed.
8200-M538-O1
y 225 Installation
Page 94