Cardinal Industries 225 WEIGHT INDICATOR - Manual (Page 90)

ID STORAGE OPERATION, CONT.
PERMANENT ID - Single Pass Transaction (One-Step Operation)
d to weigh LOADED containers with a
ID string. This
tered
3. Enter up to a 12 digit alpha-numeric ID string and press the ENTER key.
d the name associated with the ID) then
. If two ID prompts are required, enter up to a 12 digit alpha-numeric string for the second
ID prompt.
y If o
d print
the
y If three ID prompts are required press the ENTER key to proceed to the third
prompt.
6. The display will show ID3= (the Prompt 3 name entered in ID Storage Setup).
7. Enter up to a 12 digit alphanumeric string for the third ID prompt.
8. Press the PRINT or ENTER key to store the tare weight and print the ticket.
9. The indicator will print a ticket, display Print Pass 2, and then display
Accumulating before returning to the Gross weight display.
10. The Net weight will be added to the accumulator of the entered ID string and the ticket
printed will show the TIME, DATE, ID, TIME/DATE of Stored Tare weight, the Gross,
Tare, and Net weights.
The single pass transaction (one step operation) is use
permanent ID string and a previously stored tare weight associated with that
requires weighing the empty container in advance or if the empty weight is known, by entering
that value as a manual tare weight.
Loaded Container With Three ID Prompts
1. With the indicator in normal operations mode, place the loaded container on the scale
2. Press the ID key. The display will change to show ID1= (the Prompt 1 name en
in ID Storage Setup).
4. The display will momentarily show REF= (an
change to ID2= (the Prompt 2 name entered in ID Storage Setup).
y If only one ID prompt is needed, press the PRINT key to store the weight and print
the ticket. Proceed to Step 9.
5
nly two ID prompts are needed, press the PRINT key to store the weight an
ticket. Proceed to Step 9.
8200-M538-O1
y 225 Installation
Page 86