Cardinal Industries 225 WEIGHT INDICATOR - Manual (Page 82)

PRESET WEIGHT COMPARATORS SETUP
= 3 (Preset Weight Comp)
With S ter will
be sho how
the Mo R key to select
Preset
Mode of Operation
ETUP MENU #1 displayed the current setting for the MODE OF OP= parame
wn. Press the 1 and 0 keys and then the ENTER key. The display will change to s
de Of Operation Menu. Press the 3 key and then the ENTE
Weight Comp. The display will change to show the ID Storage Menu.
Preset Weight Comparator Menu
1. OUTPUTS=XX
2. BAL PRNT=XXX
Enter Selection: 0
^ EXIT
1. ORS “PWC”)
ith the Preset Weight Comparator Menu displayed the current setting for the
n. Note that XX is the current value. If the setting
r the
2
3
Low State before cutoff with 3 active Presets
utoff with 4 active Presets
ff with 7 active Presets
High State before cutoff with 5 active Presets
14 High State before cutoff with 6 active Presets
15 High State before cutoff with 7 active Presets
16 High State before cutoff with 8 active Presets
*
The relay state is based on using Cardinal Scale relays (p/n 6850-1013). If using relays
other than those supplied by Cardinal Scale, refer to the relay manufacturers specifications.
NOTE! When power to the 225 is lost, the output returns to a Low State condition.
OUTPUTS (NUMBER OF PRESET WEIGHT COMPARAT
W
OUTPUTS= parameter will be show
displayed is acceptable, proceed to the next setup parameter.
Otherwise, press the 1 key, the ENTER key and then using the numeric keys, ente
alue for the number of PWC outputs and then press the ENTER key to save the new v
setting and return to the ID Storage Menu. Allowable values are: 1 through 16.
1 Low State before cutoff with 1 active Preset
Low State before cutoff with 2 active Presets
Relay* 4 Low State before c
Open 5 Low State before cutoff with 5 active Presets
6 Low State before cutoff with 6 active Presets
7 Low State before cuto
8 Low State before cutoff with 8 active Presets
9 High State before cutoff with 1 active Preset
10 High State before cutoff with 2 active Presets
11 High State before cutoff with 3 active Presets
12 High State before cutoff with 4 active Presets
13
Relay*
Closed
8200-M538-O1
y 225 Installation
Page 78