Cardinal Industries 225 WEIGHT INDICATOR - Manual (Page 64)

CALIBRATION AND SETUP, CONT.
2. FMAX=XXX (MAX
P MENU #2 displayed the current setting for the FMAX=
maximum filter
filtering and 1 the least. If the setting displayed is
Otherwise, press the 2 key, the ENTER key and then using the numeric keys, enter the
maximum filter level and then press the ENTER key to save the new
255.
.
corresponds to the number of division
change the setting displayed is acceptable, proceed to
the ne
Otherw
e key and then using the numeric keys, enter the
value f t g TER key to save the new
setting and return to E 1 SETUP MENU #2. Allowable values are: 1 through 255.
the next setup parameter.
Otherw
ey R key and then using the numeric keys, enter the
value for the interval and then press the ENTER key to save the new setting and return
If the 225 is used in a Legal For Trade application ( LFT=YES), allowable values are:
1, 2, 5 0
If the 225 is NOT used in a Legal For Trade application (
IMUM FILTER LEVEL)
With SCALE 1 SETU
parameter will be shown. Note that XXX is the current value for the
mber from 1 to 255 that corresponds to the level of filtering level. The filter level is a nu
with 255 being the greatest
acceptable, proceed to the next setup parameter.
value for the new
setting and return to SCALE 1 SETUP MENU #2. Allowable values are: 1 through
3. FBRK=XXX (FILTER BREAK RANGE)
With SCALE 1 SETUP MENU #2 displayed the current setting for the FBRK=
parameter will be shown. Note that XXX is the current value for the filter break range
The break range is a number from 1 to 255 that
s to break out of the filtering. If
parameter. xt setup
ise, press th
or the new fil
3 key, the ENTER
k ran er brea
SCAL e and then press the EN
4. INTERVAL=XX (INTERVAL SETTING)
With SCALE 1 SETUP MENU #2 displayed the current setting for the INTERVAL=
parameter will be shown. Note that XX is the current value for the interval (division)
setting. If the setting displayed is acceptable, proceed to
ise, press the 4 k , the ENTE
to SCALE 1 SETUP MENU #2.
, 10, 2 or 50.
LFT=NO), allowable values
are: 1 through 99.
8200-M538-O1
y 225 Installation
Page 60