Cardinal Industries 225 WEIGHT INDICATOR - Manual (Page 57)

CALIBRATION AND SETUP, CONT.
12. G ACCUM=YY.XX (GROSS WEIGHT ACCUMULATOR PRINT LOCATION)
=
next
eter.
NU #2.
PRINT LOCATION)
M=
arameter.
ress the ENTER key to save the new setting and
return to PRINT TABBING MENU #2.
MBER OF PIECES ON SCALE) PRINT LOCATION)
With PRINT TABBING MENU #2 displayed the current setting for the COUNT=
parameter will be shown sition for printing of the
Count ceptable, proceed to
the ne
Otherw
s, the ENTER key and then using the numeric keys,
enter the new print position and then press the ENTER key to save the new setting and
return
15. PCS WT=YY.XX (PIECE WEIGHT PRINT LOCATION)
setting for the PCS WT=
,
With PRINT TABBING MENU #2 displayed the current setting for the G ACCUM
parameter will be shown. Note that YY.XX is the current position for printing of the
Gross weight accumulator. If the position displayed is acceptable, proceed to the
setup param
Otherwise, press the 1 and 2 keys, the ENTER key and then using the numeric keys,
enter the new print position and then press the ENTER key to save the new setting and
return to PRINT TABBING ME
13. N ACCUM=YY.XX (NET WEIGHT ACCUMULATOR
With PRINT TABBING MENU #2 displayed the current setting for the N ACCU
parameter will be shown. Note that YY.XX is the current position for printing of the Net
weight accumulator. If the position displayed is acceptable, proceed to the next setup
p
Otherwise, press the 1 and 3 keys, the ENTER key and then using the numeric keys,
enter the new print position and then p
14. COUNT=YY.XX (COUNT (NU
. Note that YY.XX is the current po
(number of pieces on scale). If the position displayed is ac
xt setup parameter.
ise, press the 1 and 4 key
to PRINT TABBING MENU #2.
With PRINT TABBING MENU #2 displayed the current
parameter will be shown. Note that YY.XX is the current position for printing of the
Piece weight. If the position displayed is acceptable, proceed to the next setup
parameter.
Otherwise, press the 1 and 5 keys, the ENTER key and then using the numeric keys
enter the new print position and then press the ENTER key to save the new setting and
return to PRINT TABBING MENU #2.
8200-M538-O1
y 225 Installation
Page 53