Calibration and setup, cont – Cardinal Industries 225 WEIGHT INDICATOR User Manual
Page 55
CALIBRATION AND SETUP, CONT.
TABS SETTING (General Format Information)
The ge
Whe
A
YY is the number of lines down
XX is the number of spaces to the right.
N
d
6.
urrent position for printing of the time.
the position displayed is acceptable, proceed to the next setup parameter.
nter the
new print position and then press the ENTER key to save the new setting and return to
7.
ate.
eter.
to
8. CNC NO=YY.XX (CONSECUTIVE NUMBER PRINT LOCATION)
tting for the
CNC NO=
therwise, press the 8 key, the ENTER key and then using the numeric keys, enter the
to
neral format for the input is A = YY.XX.
re:
is the character identifying the data printed
OTE! Enter 00 in either location, YY or XX, to disable the
ata from printing.
TIME=YY.XX (TIME PRINT LOCATION)
With PRINT TABBING MENU #1 displayed the current setting for the
TIME=
parameter will be shown. Note that YY.XX is the c
If
Otherwise, press the 6 key, the ENTER key and then using the numeric keys, e
PRINT TABBING MENU #1.
DATE=YY.XX (DATE PRINT LOCATION)
With PRINT TABBING MENU #1 displayed the current setting for the
DATE=
parameter will be shown. Note that YY.XX is the current position for printing of the d
If the position displayed is acceptable, proceed to the next setup param
Otherwise, press the 7 key, the ENTER key and then using the numeric keys, enter the
new print position and then press the ENTER key to save the new setting and return
PRINT TABBING MENU #1.
With PRINT TABBING MENU #1 displayed the current se
parameter will be shown. Note that YY.XX is the current position for printing of the
consecutive number. If the position displayed is acceptable, proceed to the next setup
parameter.
O
new print position and then press the ENTER key to save the new setting and return
PRINT TABBING MENU #1.
8200-M538-O1
y 225 Installation
Page 51