Cardinal Industries 225 WEIGHT INDICATOR - Manual (Page 56)

CALIBRATION AND SETUP, CONT.
9. GROSS=Y
ed the current setting for the GROSS=
meter will be shown. Note that YY.XX is the current position for printing of the
Otherwise, press the 9 key, the ENTER key and then using the numeric keys, enter the
e new setting and return to
MENU #1.
10. TARE=YY.XX (TARE WEIGHT PRINT LOCATION)
current setting for the TARE=
the Tare
Otherwise, press the 1 and 0 keys, the ENTER key and then using the numeric keys,
ith PRINT TABBING MENU #1 displayed, press NEXT (Navigation Keys Down Arrow) to
pro
Y.XX (GROSS WEIGHT PRINT LOCATION)
With PRINT TABBING MENU #1 display
para
Gross weight. If the position displayed is acceptable, proceed to the next setup
parameter.
new print position and then press the ENTER key to save th
PRINT TABBING
With PRINT TABBING MENU #1 displayed the
parameter will be shown. Note that YY.XX is the current position for printing of
weight. If the position displayed is acceptable, proceed to the next setup parameter.
enter the new print position and then press the ENTER key to save the new setting and
return to PRINT TABBING MENU #1.
W
ceed to PRINT TABBING MENU #2.
PRINT TABBING MENU #2
11. NET=YY.XX 16. TIME=YY.XX
12. G ACCUM=YY.XX 17. DATE=YY.XX
X
13. N ACCUM=YY.XX
14. COUNT=YY.XX
15. PCS WT=YY.X
Enter Selection: 0
^ PREV ` EXIT
11.
n. Note that YY.XX is the current position for printing of the Net weight. If
the position displayed is acceptable, proceed to the next setup parameter.
d then press the ENTER key to save the new setting and
return to PRINT TABBING MENU #2.
NET=YY.XX (NET WEIGHT PRINT LOCATION)
With PRINT TABBING MENU #2 displayed the current setting for the NET= parameter
will be show
Otherwise, press the 1 key twice, the ENTER key and then using the numeric keys,
enter the new print position an
8200-M538-O1
y 225 Installation
Page 52