Cardinal Industries 225 WEIGHT INDICATOR - Manual (Page 76)

CALIBRATION AND SETUP, CONT.
SETUP MENU #3
ACCUMULATORS
With SETUP MENU #2 displayed, press NEXT (Navigation Keys Down Arrow) to proceed to
ETUP MENU #3. S
SETUP MENU #3
1. G/N ACCUMS=
2. BACK LITE= X
XXX
3. PASSWORD
Enter Selection: 0
^ PREV ` EXIT
1. G/N ACCUMS (GROSS/NET ACCUMULATORS)
With the SETUP MENU #3 displayed the current setting for the G/N ACCUMS=
parameter will be shown. Note that XXX is the current value. If the setting displayed is
acceptable, proceed to the next setup parameter.
Otherwise, press the 1 key, the ENTER key, YES or NO (on the soft keys) and then the
ENTER key to save the new setting and return to the SETUP MENU #3.
G/N ACCUMS=YES G/N ACCUMS=NO
Gross and Net Accumulators
are Enabled Gross and Net Accumulators
are Disabled
BACK LIGHT
2. BACK LITE (BACKLIGHT TURN-ON LEVEL)
With the SETUP MENU #3 displayed the current setting for the BACK LITE= parameter
will be shown. Note that XX is the current value. If the setting displayed is acceptable,
proceed to the next setup parameter.
Otherwise, press the 2 key and then the ENTER key. The display will change to show the
current light level (
Lights= XX).
SETUP MENU #3
Lights= XX
BACK LITE = XX
8200-M538-O1
y 225 Installation
Page 72