Cardinal Industries 225 WEIGHT INDICATOR - Manual (Page 104)

ASCII COMMANDS
The Model 225 indicator will respond to ASCII coded serial data, in the format below, when
llowed by a carriage return
and can be upper or lower case, or any combination.
parameter item designator (e.g. “PWC (1) ” requests
the value of PWC number 1 preset to be transmitted from the indicator).
y lowed by the equal sign “=” is a set command and must be followed by
the data desired to be stored for that parameter.
ithout an equal sign requests data to be transmitted from the indicator
(a query command).
y
etween the values.
the indicator, send the command to request
ame data to be transmitted from the indicator.
Commands
U
Command
input to the RXD serial input or the IR port.
y The commands are ASCII strings, without spaces, fo
y Data inside parenthesis is the
A command fol
y Any command w
Commands that set more than one value use commas b
y To verify data has been stored correctly in
the s
U U
Response
U
Description
U U
Gross 1000lb G Transmit Gross Weight
Tare 00lb T Transmit Current Tare 1
Tare=123 OK Set Tare To Value
Net 00lb N 9 Transmit Net Weight
PWC (1) 0lb PWC1 ransmit PWC Value 10 T
PWC (1)=123 K ue O Set PWC To Val
Fas 100lb F it 2 Speed DFC Fast Value t Transm
Fast=123 Set 2 Speed DFC Fast Value OK
Slow Transmit 2 Speed DFC Slow Value 100lb F
Slow=123 OK Set 2 Speed DFC Slow Value
Fill 100lb F Transmit 1 Speed DFC Value
Fill=123 OK Set 1 Speed DFC Value
Trim 100lb TRM Transmit DFC Trim Value
Trim=123 OK Set DFC Trim Value
Accum(g) 1000lb
Transmit Accumulator Valid Selections
G/N/C/1-7
Accum(n)=100 OK Set Accumulator
Ing(1) 1 100lb 1200lb Transmit Ingredient (Bin,Fast,Slow)
Ing(1)=1,100,150 OK Set Ing (Bin,Fast,Slow)
Trim(1) 100lb TRM1 Transmit Batcher Trim For Ing X
Trim(1)=100 OK Set Batcher Trim
ID() id(x)=r,1,2 List ALL IDs ID(ID)=Ref,Tare,Accum
ID(1) id(1)=r,1,2 List A Single ID
ID(1)=ref,100,0 OK Add Or Replace An ID
Key(x) Results of (x) function.
Performs function of (x) as if key was
pressed. See Valid Key Names.
= carriage return
8200-M538-O1
y 225 Installation
Page 100