B&G Deckman - Manual (Page 89)

Chapter 5: Data
5.12
separated by TAB characters, and you can specify the name and the
location using the box and/or browse button at the bottom right of the
window.
Speed Test
This feature allows you to analyse data from your speed tests.
Select data>Speed Test, and you will be presented with a window like
that shown in Figure 5.7 (except that there will be no data plotted on the
graph). If you know the date of the tests you require, select the date in
the Test 1 or Test 2 box, and then select the correct test from the drop-
down list. If you do not know the exact date of the tests you require, hit
the browse button, shown left. In the Choose Test dialog, select your
start and end dates and all the tests in that period will be shown, along
with the parameters. Check the ones you want followed by OK – the
two tests you select will be shown in the Test 1 and Test 2 boxes.
Note If you select more than two tests in the Choose Test dialog, then
the most recent selections will be used.
Note. Once you have used the Choose Test dialog once, then all the
tests in the dates you specify are available from the drop-down menus
until you specify different dates.
When you have selected the correct tests hit the Compare button.
Deckman will plot the graph for TWA and TWS, as shown in Figure
5.7.