B&G Deckman - Manual (Page 112)

h2000 Performance Unit
7.7
When you have selected runs a calibration value is then shown in the
Calibration box. Either choose Send Cal to accept the value or do more
runs and calculations.
Advanced calibration facilities
There are facilities within Deckman for advanced control of a B&G
WTP. You are able to access the calibration and damping files directly,
and these work as described in Chapter 4 of your WTP manual. When
connected to a WTP, click gmenu>instruments control to access the
standard WTP instrument controls. Now click menu followed by either
advanced WTP calibration or advanced WTP damping. For more
information on the operation of these files, please consult your WTP
manual.
h2000 Performance Unit
When you select gmenu>change instruments>B and G you establish
communications with a B&G h2000 system (also earlier 690 systems
and onwards). You can send information from Deckman back to the
instrument system, which can then distribute it throughout the boat’s
displays. You can also alter any of the calibration values on the B&G
system from Deckman as well as, or instead of, from an FFD.
Choose gmenu>instruments control to change settings or select
variables to display using the external channels.