B&G Deckman - Manual (Page 109)

Chapter 7: Instruments
7.4
Output
This controls the output of Deckman variables to the WTP to be viewed
on the displays.
To add a variable, click on the first blank line of the variables column,
select the appropriate Deckman variable from the list followed by OK.
The variable will be displayed on that line, with the channel column
showing –1 and the current data shown in the final column. The –1
indicates that output of this variable is OFF – to turn on, click on the
number and assign a channel number.
Calibration
Most of the calibration functions work in exactly the same way as on
Hydra and Hercules systems. Those which differ are described below:
Figure 7.3