Boat parameters – B&G Deckman User Manual
Page 85
![background image](/manuals/599961/85/background.png)
Chapter 5: Data
5.8
There are two files in the example: first.log and second.log. First.log has
its output turned on immediately on startup because ON follows the
filename. It has three time frames: the first is very long and serves to
send a title message every time the program is started; the second just
puts out the date every 24 hours (at midnight), and every 15 minutes
position and time are recorded.
A single line is written to second.log every 15 seconds; the names of the
variates are written out along with their values.
Boat parameters
Deckman allows you to keep a record of different parameters which
might affect boat performance. Hit data>setup boat params and you
will be presented with the Boat Parameters window, like that shown in
Figure 5.4. The first column is the name of all the parameters currently
entered in the system, the second column lists the present values and the
third shows the last time the value of this parameter was changed.
Figure 5.4