B&G Deckman User Manual
Page 26
Deckman re-installation over an existing version
2.11
Install Deckman by running the SetupDeckman.exe installation
program on the CD-ROM. There will be two sections to the installation:
Deckman and the Euronav Charting System which is automatic after
Deckman.
Once installation is complete, if using an old dongle (SN beginning
1071), you must set the [livechart] path in the Deckman.ini file to that
noted above.
Copy the files you backed up above into the new Data directory,
overwriting the files that have been installed with the new installation.
The remainder of the installation is as normal (as described at the
beginning of this chapter). Run Deckman and connect to the appropriate
instrument system. Select gmenu>configure comms and set the
Communications protocol as noted in the first step.